Samsung SGH-U700 Service Manual page 13

Exploded View and Parts List
5
1) Assemble the slide FPCB into the LCD module.
2) Solder the side pads of slide FPCB.
※ Caution
1) Be care of damage to F-PCB of slide.
2) Be care of solder longer than 3 seconds.
7
1) Check the external damage of slide upper.
※ Caution
1) Be care of scratch and molding damage.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Attach the tape to the designated point.
※ Caution
1) Be care of scratch and molding damage.
8
1) Place the LCD module like the picture.
2) Attach the touch FPCB to the designated point.
3) Solder the pads of touch FPCB.
※ Caution
1) Be care of damage to the touch F-PCB
2) Please keep the guide silks attaching touch
F-PCB.
2-8