Fru Replacement Notices; Screw Notices - Lenovo IdeaPad Yoga 11 Hardware Maintenance Manual

IdeaPad Yoga 11 Hardware Maintenance Manual

FRU replacement notices

This section presents notices related to removing and replacing parts. Read
this section carefully before replacing any FRU.

Screw notices

Loose screws can cause a reliability problem. In the Lenovo IdeaPad computer,
this problem is addressed with special nylon-coated screws that have the
following characteristics:
Do the following when you service this machine:
Tighten screws as follows:
30
They maintain tight connections.
They do not easily come loose, even with shock or vibration.
They are harder to tighten.
Each one should be used only once.
Keep the screw kit in your tool bag.
Always use new screws.
Use a torque screwdriver if you have one.
Plastic to plastic
Turn an additional 90° after the screw head touches the surface of the
plastic part:
Logic card to plastic
Turn an additional 180° after the screw head touches the surface of the
logic card:
Torque driver
If you have a torque screwdriver , refer to the "Torque" column for each step.
Make sure that you use the correct screws. If you have a torque screwdriver,
tighten all screws firmly to the torque shown in the table. Never use a
screw that you removed. Use a new one. Make sure that all screws are
Ensure torque screwdrivers are calibrated correctly following country
more than 90°
(Cross-section)
more than 180°
(Cross-section)