Table of Contents
Advertisement
16
Chapter 2 Preparation
Cleaning Request Mode
Automatic cleaning requests can be enabled by a DIP switch.
When switch 6 is ON, cleaning requests are enabled. When enabled, the
"CLEANING REQUEST" LED on the front panel lights after every 100
hours of operation.
When this LED lights, clean the drive with a head cleaning cartridge.
Note
To maintain the drive in optimum condition in environments affected by dust and other
contaminants, we recommend keeping cleaning requests enabled.
ON
OFF
1
2
3
Emulation Mode
*
To enable Emulation Mode, set position 1 - 4 Drive Mode switches to ON.
ON
OFF
1
2
3
*
Emulation Mode returns the following in the Product Identification field of
Inquiry of the AITe130V-UL.
SDX-520C
*
Emulation Mode returns the following in the Product Identification field of
Inquiry of the AITe90V-UL.
SDX-420C
Data Compression Control DIP switch
Data compression can be selected by DIP switches. Data compression is
enabled while position 7 [DC Control (1)] is ON. Control by host can be
disabled when position 8 [DC Control (2)] is ON.
4
5
6
7
8
4
5
6
7
8
1
Drive Mode
2
Drive Mode
3
Drive Mode
4
Drive Mode
5
Reserved
6
Periodic Cleaning Req (ON)
7
DC Control (1)
8
DC Control (2)
1
Drive Mode (ON)
2
Drive Mode (ON)
3
Drive Mode (ON)
4
Drive Mode (ON)
5
Reserved
6
Periodic Cleaning Req
7
DC Control (1)
8
DC Control (2)
Advertisement
Table of Contents
