Osd Menu Operation; Video Menu - Sanyo FVM4612 Owner's Manual

OSD Menu Operation

To enter the OSD (On-Screen Display):
1. Press [MENU] button on the remote control
to display the OSD nenu.
2. Use the cursor buttons (▲▼◄►) to
highlight your selection.
3. Press [ENTER] button to confirm your
selection.
4. Press [EXIT] button to exit from any menu
layer instantly.

Video Menu

Video Picture Mode
Brightness
Audio
Contrast
Channels Color
Advanced Video
Setup
Reset Video Settings
Photos
Adjust settings to affect picture quality
ENTER Select
Move
‰ Picture Mode
Enter this menu to select from preset picture
settings to optimize your TV's performance.
• Vivid: Provides enhanced picture contrast
and sharpness for viewing in a well-lit
room.
• Natural: Provides a highly defined image
for viewing in a normally-lit room.
• Standard: Provides a less power
consuming settings.
• Cinema: Provides a soft, film-like picture
for watching movies in a darkened room.
• Custom: Any changes made to the other
modes will be applied to this mode.
‰ Brightness
Adjust picture brightness.
‰ Contrast
Adjust picture contrast.
‰ Color
Adjust picture color.
14
Standard
50
60
55
MENU Previous EXIT Exit
‰ Advanced Video
Select advanced video settings.
• Color Temperature: Selects a choice
of Cool (blue), Normal, or Warm (red)
color.
• Noise Reduction: Set to reduce video
noise.
• Tint: Adjust the hue (red, green, blue) of
the picture.
• Sharpness: Set to enhance the picture
detail.
• Adaptive Contrast: Set to automatically
adjust the picture detail and brightness.
• Aspect Ratio: Adjust how the picture fills
the screen.
• Overscan: Set OFF to show the full
image on the TV when connecting a
computer. Set ON to show the full image
on the TV when not connected with a
computer.
• Backlight: Set the backlight brightness.
‰ Reset Video Settings
Reset Video settings to factory default
settings.
www.sanyoctv.com
Need help? 1-800-877-5032