Table of Contents
Advertisement
6 Install channels
The À rst time you set up your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and À ne tune channels.
Automatically install channels
This section describes how to search and store
channels automatically.
1
Press MENU .
2
Select [Setup] > [Installation] >
[Channel install.] > [Channel assistant] .
3
Press OK .
4
Follow the on-screen instructions to
install channels.
Manually install channels
This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
Note
•
Skip this step if your system settings are
correct.
1
Press MENU .
2
Press
to select [Setup] > [Installation]
> [Channel install.] > [Manual install] .
»
The
[Manual install] menu appears.
3
Press
to select [Colour system] , then
press
to enter.
4
Select your system, then press OK to
conÀ rm.
5
Repeat the previous steps for [Sound system] .
6
Press MENU to exit.
Step 2 Search and store new TV
channels
1
Press MENU .
2
Press
to select [Setup] >
[Installation] > [Channel install.] >
[Manual install] .
»
The
[Manual install] menu appears.
3
Press
to select [Search] , then press
to enter.
4
Press Numeric buttons to manually enter
the three-digit frequency.
5
Press OK to begin search.
»
If a channel is unavailable at the
selected frequency, the system searches
for the next available channel.
6
Press
BACK when the new channel is
found.
7
Press
to select [Store new channel]
to store the new channel under a new
channel number.
8
Press
to enter [Store new channel] .
9
Select [OK] , then press OK to store the
new channel.
10
Press MENU to exit.
Step 3 Fine-tune analogue channels
1
Press MENU .
2
Press
to select [Setup] >
[Installation] > [Channel install.] >
[Manual install] .
»
The
[Manual install] menu appears.
3
Press
to select [Fine-tune] , then press
to enter.
4
Press
to adjust frequency.
5
Press OK to conÀ rm.
6
Press
to select [Store curr. chan.] to
store the channel number.
7
Press
to enter [Store curr. chan.] .
8
Select [OK] , then press OK to store
current channel.
9
Press MENU to exit.
EN
17
Hide quick links:
Advertisement
Table of Contents
