Watchguard Firebox X55e Quick Start Manual page 4

5
Run the Quick Setup Wizard
Important!
Before you start the Quick Setup Wizard, make sure:
You have registered your Firebox X Edge with LiveSecurity.
■
You have a copy of your feature key.
■
Your computer is set to connect using DHCP.
■
1. Start your web browser.
2. Type https://192.168.111.1 in the address bar of your browser and press Enter.
3. Use the Quick Setup Wizard to configure your Firebox X Edge.
4. Use the user name and password you set in the wizard to log in to your Edge.
5. To install the most current Edge software, run the executable you saved in section 1, step 5.
Your Firebox X Edge is protecting your network!
Now, you can create firewall rules and user accounts to enforce the security
requirements of your company. You also can:
See network statistics
■
Monitor log messages
■
Set custom firewall rules to allow or deny connections
■
Configure Virtual Private Networks (VPNs)
■
Manage network traffic with Quality of Service (QoS)
■
Use LDAP or Active Directory for authentication
■
TECHNICAL SUPPORT
1.877.232.3531
(U.S. and Canada)
ADDRESS:
505 Fifth Avenue South, Suite 500
Seattle, WA 98104-3892
U.S. SALES:
1.800.734.9905
©2006 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, Firebox, LiveSecurity and the WatchGuard logo are either trademarks or registered trademarks of WatchGuard Technologies, Inc.
in the United States and/or other countries. All other trademarks are the properties of their respective owners. P.N. 352-2545-002 WGPE66377_092006
+1.206.613.0456
(all other countries)
WEB:
www.watchguard.com
INTERNATIONAL SALES:
+1.206.613.0895
www.watchguard.com/support