2. Screw in the six clamp screws. As
the screw turns clockwise, a clamp
rotates out and presses onto the
back of the sheetrock to hold the
subwoofer firmly in place.
Tighten the clamps so they are
snug, but do not overtighten, as
they could damage the sheetrock.
Tighening the clamps
(sheetrock not shown, for clarity)
User's Manual
Final steps
1. Add the grille to cover and protect
the woofers.
2. The grill can be painted if desired,
and this best done when it is not
attached to the subwoofer.
3. Enjoy your new subwoofer.
1