Dell Inspiron 3500 Service Manual page 75

FPH 2.5 x 19 (7) 3.5–4.0 kgf-cm
To remove the palmrest assembly, see Figures 4-15 and 4-23 and follow these
steps:
1. Remove the display assembly.
2. Remove the keyboard.
3. Turn the computer face down.
4. Remove the seven 19-mm palmrest screws from the bottom of the com-
puter (see Figure 4-23).
5. Turn the computer face up.
6. Remove the palmrest assembly.
After installing the palmrest assembly, make sure that the battery-bay release
latch and the options-bay release latch operate smoothly. If they do not, slightly
loosen the two palmrest assembly screws that secure the latches so that the
latches move easily.
16-mm
screws (7)
Removing and Replacing Parts 4-39