Coleman SUNDOME 7’x7’ Instructions

When You Are Ready To Set Up
Your Tent
–Select a level campsite clear of rocks,
branches and other hard or sharp objects.
–Do not set up your tent under trees. ™
–For best results in windy conditions,
position the end of tent into the wind.
–See owners manual for more tips.
1 Layout & Positioning
of Tent, Pole
Assembly
–Layout and position tent with door
facing desired direction. (illus. 1)
–Unzip door
–Stake down tent corners only, using the
rings at the end of the stake loops.
Keep the floor taut.
–Assemble Frame Poles by
interlocking shock-corded poles.
This will make two long poles.
–Insert the poles diagonally into Pole
Sleeves.The center of the poles should
cross forming an "X" in the middle of
tent. (illus. 1)
–Fasten Frame Tie on top of tent over
both poles. (illus. 1), (illus. 3)
Assembled
poles
inserted
through
pole
sleeves
illus. 1
SUNDOME
Instructions apply to Part Number 9260N707
Main Tent
Part No. 9260A702
Poles
Rainfly Pole
Part No. 9260-703
Part No. 9260M704
Rainfly
Frame Tie
illus. 2
Tent stake
through ring
7'x 7'
™
POLE ASSEMBLY PARTS
2

Connect Frame to Tent

–Insert one end of main tent pole end
onto pin of ring and pin system, at tent
corner. (illus. 4)
–Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole
–Repeat for second pole
illus. 3
Frame Tie
illus. 5
Tent frame
set-up
illus.4
Insert pole end onto
pin & ring