Control Panel And Features - Whirlpool W10330947A User Instructions

CONTROL PANEL AND FEATURES

1
1
Load Size Control
1
Use this option to adjust the amount of water used with
your load size. Use enough water to allow the load to
move freely.
Temperature Control
2
Temperature Control senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Warm and hot water will be cooler than what your
■
previous washer provided.
Even in Cool wash, some warm water is let into washer
■
to maintain a consistent minimum temperature.
Select a wash temperature based on the type of fabric and
soils being washed. For best results, follow the garment
label instructions, using the warmest wash water safe for
your fabric. See "Wash Temperature" Chart.
NOTE: In wash water temperatures colder than 60° F (15.6° C),
detergents do not dissolve well and soils can be difficult to
remove.
Extra Rinse
3
If you desire an extra rinse at the end of your regular cycle,
turn the Extra Rinse knob to ON.
On models without the Extra Rinse knob, choose a second
rinse by pushing the Cycle Control knob in and rotating it to
any of the "Rinse" cycle settings.
End of Cycle Signal
4
The End of Cycle Signal sounds when the cycle is complete.
2 3 4
3
2
Not all features and options are available on all models.
Appearance may vary.
4
Cycle Control knob
5
Select the wash cycle best suited for your type of fabric.
See "Cycle Guide" for more details.
Wash Temperature
Hot
Some cold water is added to
save energy. This will be cooler
than your hot water heater setting.
Warm
Some cold water will be added,
so this will be cooler than what
your previous washer provided.
Cool - brights/darks
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Cold
This is the temperature from
your faucet.
5
5
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
Dark colors that bleed
or fade
Light soils
3