Whirlpool RF366PXY Use And Care Manual page 29

If You Need Assistance
Or Sewice
This section is designed to help you save the cost of a service call. Part 1 of this section
outlines possible problems, their causes, and actions you can take to solve each problem.
Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our
Consumer Assistance Center for help or calling for service, please provide a detailed descrip-
tion of the problem, your appliance's complete model and serial numbers and the purchase
date. (See page 2.) This information will help us respond properly to your request.
1. Before calling for assistance . . .
Performance problems often result from little things you can find and fix without tools of any
kind. Please check the chart below for problems you can fix. It could save you the cost of a
service call.
PROBLEM POSSIBLE CAUSE
SOLUTION
Nothing operates
The power supply cord is Plug power supply cord into a live circuit
not plugged into a live
with proper voltage. (See Installation
circuit with the proper Instructions.)
voltage.
A household fuse has
Replace household fuse or reset circuit
blown or a circuit breaker
breaker.
has tripped.
The oven will not
The Oven Selector is not Turn the Oven Selector to the desired
operate turned to BAKE or
setting.
BROIL.
A delayed start time has
Wait for the start time to be reached.
been set.
The Oven Temperature
Control Knob is not
turned to a temperature
setting.
Turn the Oven Temperature Control Knob
to the desired setting.
The MEALTIMER'" clock Set the MEALTIMER clock correctly.
is not set correctly. (See "Using the MEALTIMER'" clock" on
page 17.)
The Stop or Start Time If a delay start or stop is not desired, the
Knobs for the Stop and Start Time Knobs must be turned
MEALTIMERTM clock are to the correct time of day. Turn knobs till
not set at the correct time they pop out.
of day.
Surface units will
A household fuse has Replace household fuse or reset circuit
not operate
blown or a circuit breaker breaker.
has tripped.
The control knob(s) will Turn knob(s) again, pushing in as you
not turn.
turn.
continued on next page
29