Interior Lighting; Overview; Reading Lamp - Mercedes-Benz GL Operator's Manual

To switch on: turn the light switch to
X
Ã.
Press the combination switch beyond the
X
pressure point in the direction of
arrow :.
The _ indicator lamp in the
multifunction display lights up when it is
dark and the light sensor activates the low-
beam headlamps.
If you are driving at speeds above
approximately 16 mph (25 km/h):
The headlamp range is set automatically
depending on the distance between the
vehicle and other road users.
If you are driving at speeds above
approximately 19 mph (30 km/h) and no
other road users have been detected:
The high-beam headlamps are switched on
automatically. The K indicator lamp in
the instrument cluster also lights up.
If you are driving at speeds below
approximately 16 mph (25 km/h) or other
road users have been detected or the roads
are adequately lit:
The high-beam headlamps are switched off
automatically. The K indicator lamp in
the instrument cluster goes out. The _
indicator lamp in the multifunction display
remains lit.
To switch off: move the combination
X
switch back to its normal position or move
the light switch to another position.
The _ indicator lamp in the instrument
cluster goes out.
Headlamps fogged up on the inside
Certain climatic and physical conditions may
cause moisture to form in the headlamp. This
moisture does not affect the functionality of
the headlamp.

Interior lighting

Overview of interior lighting
Overhead control panel
p To switch the left-hand front reading
:
lamp on/off
c To switch the front interior lighting
;
on
v To switch the on/off
=
| To switch the front interior lighting/
?
automatic interior lighting control off
p To switch the right-hand front
A
reading lamp on/off
To switch the automatic interior lighting
B
control on
Rear overhead control panel (second row of seats)
To switch the reading lamp on/off
:
Interior lighting
Z
135