Deactivating/Activating - Mercedes-Benz C-Class Operator's Manual

Driving
152
the brake system requires this.
R
the temperature in the vehicle interior
R
deviates from the set range.
the system detects moisture on the
R
windshield when the air-conditioning
system is switched on.
the condition of charge of the battery is too
R
low.
the driver's seat belt is removed or the
R
driver's door is opened.
Vehicles with automatic transmission
The engine is started automatically if you:
release the brake pedal when HOLD is not
R
activated and the transmission is in
position D or N.
depress the accelerator pedal.
R
move the transmission out of position P.
R
i
Shifting the transmission to position P
does not start the engine.
i
If you shift the transmission from R to D,
the ECO start/stop function is available
again once the ¤ symbol reappears in
green in the multifunction display.
Deactivating/activating the ECO start/
stop function
ECO button
To switch off: press button :.
X
Indicator lamp ; on button : and the
¤ symbol in the multifunction display go
out.
To switch on: press button :.
X
Indicator lamp ; lights up.
If all conditions for automatic engine
switch-off ( page 151) are fulfilled, the
Y
¤ symbol is shown in green in the
multifunction display.
If not all conditions for automatic engine
switch-off ( page 151) are fulfilled, the
Y
¤ symbol is shown in yellow in the
multifunction display. If this is the case, the
ECO start/stop function is not available.
i
If indicator lamp ; is off, the ECO start/
stop function has been deactivated
manually or as the result of a malfunction.
The engine will then not be switched off
automatically when the vehicle stops.