Using The Remote To Control Cable Box/Satellite Functions - Hitachi 50GX49B Operating Manual

USING THE REMOTE TO CONTROL CABLE BOX/SATELLITE FUNCTIONS

- 27 -
(1) VCR Button
This button allows the remote to control your VCR by setting it to VCR mode.
(2) PRECODED VCR Buttons
These buttons transmit the chosen precoded VCR codes. For some VCRs, you must press the RECORD button twice to
record a program.
(3) EXCLUSIVE TV Buttons
These buttons are for operating the TV.
NOTE: Refer to instruction manual of the VCR for operation of the buttons exclusively for the VCR.
USING THE REMOTE TO CONTROL CABLE BOX/SATELLITE FUNCTIONS
Operating the precoded function for your cable/satellite box.
This remote is designed to operate different types of cable boxes and satellite systems. You must first program the remote
to match the remote system in your cable/satellite box. (Refer to page 27.)
1. Turn ON your cable/satellite box.
2. Aim the remote control at the front of your cable/satellite box.
3. Press the CABLE button on the remote to switch to cable/satellite mode.
4. Hold down the CABLE button on the remote, enter the two digit preset code that matched your cable/satellite box as
shown on page 36. The remote will turn off your cable/satellite box when the correct two digit preset code is entered. When