Important
Wndows XP s not natvely supported to be nstalled n the storage devce wth AHCI
•
mode. If you stll prefer to nstall Wndows XP as the operatng system, please refer
to Appendx Install Wndows XP Notes.
•
You cannot swtch between AHCI and IDE f you already have your operatng system
nstalled.
▶
SATA1~6 Hot Plug
These tems are used to enable/ dsable the SATA ports hot plug support.
▶
HD Audo Controller
Ths tem enables/ dsables the HD audo controller.
▶
HPET
The HPET (Hgh Precson Event Tmers) s a component that s part of the chpset.
You can enable t, and wll provde you wth the means to get to t va the varous
ACPI methods.
▶
USB Configuraton
Press <Enter> to enter the sub-menu.
▶
USB Controller
Ths tem allows you to enable/ dsable the ntegrated USB 2.0 controller.
▶
Legacy USB Support
Enable or dsable support for USB keyboards, mce and floppy drves. You wll be
able to use these devces wth operatng systems that do not support USB.
▶
Onboard USB 3.0 Controller
Ths tem allows you to enable/ dsable the USB 3.0 controller.
▶
Super IO Configuraton
Press <Enter> to enter the sub-menu.
▶
Seral(COM) Port 0 Configuraton
Press <Enter> to enter the sub-menu.
▶
Seral (COM) Port0
Ths tem allows you to enable/ dsable the seral port.
▶
Seral (COM) Port0 Settngs
Select an address and correspondng nterrupt for the seral port.
▶
Hardware Montor
Press <Enter> to enter the sub-menu.
▶
CPU Smart Fan Target
Controls CPU fan speed automatcally dependng on the current temperature and
to keep t wth a specfic range. If the current CPU temperature reaches the target
value, the smart fan functon wll be actvated.
MS-7760
2-7