Table of Contents
Advertisement
MENU button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote.
INPUT/EXIT button
Press this button to select the current antenna source, VIDEO: 1 or 2. Your selection is shown in the top right corner of the screen.
This button also serves as the EXIT button when in MENU mode.
VOLUME level
Press these buttons for your desired sound level. The volume level will be displayed on the TV screen. These buttons also serve
as the cursor left ( ) and right ( ) buttons when in MENU mode.
CHANNEL selector
Press these buttons until the desired channel icon appears in the top right corner of the TV screen. These buttons also serve
as the cursor down ( ) and up ( ) buttons when in MENU mode.
POWER button
Press this button to turn the TV on or off.
NOTE:
Your HITACHI Projection TV will appear to be turned OFF if there is no video input when VIDEO: 1 or 2 is selected.
Check the POWER Light to make sure the TV is turned off when not in use.
To see an auto-demonstration of the on-screen displays, press and hold the POWER button on the TV set for
approximately five seconds. Press the POWER button on the TV again to end the auto-demonstration.
INPUT
VOL-
VOL+
CH- CH+
MENU
EXIT
FRONT PANEL CONTROLS
FRONT VIEW
POWER
8
Advertisement
Table of Contents
