Raid ConfiguratOn - MSI P67A-GD65 Series User Manual

Marvell RAID Marvell RAID

RAID Configuraton

Durng bootup, a screen smlar to the one below wll appear for about few seconds.
Press <Ctrl>+<M> to enter Marvell BIOS setup utlty.
Press <Ctrl>+<M> to enter BIOS Setup or <Space> to continue
Important
Be sure to enable the RAID functon for SATA devce n manboard BIOS before config-
urng the Marvell BIOS setup utlty.
The RAID setup utlty menu screen wll appear. The Man Menu shows as below.
Topology
HBA 0: Marvell 0
Vrtual Dsks
Free physcal Dsks
PD 0: ST3750330MS
PD 8: ST3750330MS
Help
Marvell RAID on chp controller.
ENTER: Operaton
■ Topology - ths pane used a tree vew to lst and show the relatonshps between
the varous physcal/ vrtual devces attached to system.
■ Informaton - ths pane s populated based on the selecton n the Topology pane.
■ Help - ths pane s used to dsplay mportant nformaton relevant to the selecton.
It may contan short descrptons on selectons, messages on settng lst tems,
default values for settngs, among others.
C-2
Marvell BIOS Setup (c) xxxx Marvell Technology Group Ltd.
Informaton
Vendor ID
Devce ID
Revson ID
BIOS Verson
Frmware Verson
PCIe Speed Rate
Configure SATA as
F10: Ext/ Save ESC: Return
: 1848
: 91xx
: 81
: 1.0.0.1008
: 2.1.0.1316
: 5.0Gbps
: AHCI Mode