Fan Power Connectors; Front Panel Connectors: Jfp1, Jfp2 - MSI H61MA-E35 (B3) User Manual

Fan Power Connectors: CPUFAN,SYSFAN
The fan power connectors support system coolng fan wth +12V. When connectng the
wre to the connectors, always note that the red wre s the postve and should be con-
nected to the +12V; the black wre s Ground and should be connected to GND. If the
manboard has a System Hardware Montor chpset on-board, you must use a specally
desgned fan wth speed sensor to take advantage of the CPU fan control.
CPUFAN
Important
• Please refer to the recommended CPU fans at processor's offical webste or consult
the vendors for proper CPU coolng fan.
• CPUFAN support Smart fan control. You can nstall Control Center utlty that wll
automatcally control the CPUFAN speeds accordng to the actual CPUFAN tem-
peratures.
Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN.
•
Front Panel Connector: JFP1
Ths connector s for electrcal connecton to the front panel swtches and LEDs. The
JFP1 s complant wth Intel Front Panel I/O Connectvty Desgn Gude.
®
SYSFAN
MS-7740 MS-7740
2-13