BIOS Setup
BIOS Setup
▶
EuP 2013
Ths tem s desgned for energy usng products lot 6 2013 (EuP) aka energy related
products (ErP); to reduce power consumpton durng system off or standby mode.
Note: Enablng EuP 2013 wll dsable support for RTC Wake Up Event.
▶
Restore on AC Power Loss
Ths tem specfies whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Power Off]
[Power On]
[Last State]
▶
Wake Up Event Setup
Press <Enter> to enter the sub-menu.
▶
Wake Up Event By
Settng to [BIOS] actvates the followng fields, and use the followng fields to set the
wake up events. Settng to [OS], the wake up events wll be defined by OS.
▶
Resume By RTC Alarm
The field s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
▶
Date/ HH:MM:SS
If Resume By RTC Alarm s set to [Enabled], the system wll automatcally resume
(boot up) on a specfic date/hour/mnute/second specfied n these fields (usng the
<+> and <-> to select the date & tme settngs).
▶
Resume By PCI or PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCI or PCIE devce.
▶
Resume From S3 by USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus-
pend to RAM) sleep state.
▶
Resume From S3 by PS/2 Mouse/ KB
These tems determne whether the system wll be awakened from S3 state when
nput sgnal of the PS/2 mouse/ keyboard s detected.
3-10
Always leaves the computer n the power off state.
Always leaves the computer n the power on state.
Restore the system to the status before power falure or nterrupt
occurred.