Information Pertaining To Oem Customers - NETGEAR AirCard 597E User Manual

Expresscard
Table of Contents

Advertisement

Document 2130917. Rev 2 Mar.11
Cet appareil numérique respecte les limites de bruits radioélec‐
triques applicables aux appareils numériques de Classe B 
prescrites dans la norme sur le matériel brouilleur: ʺAppareils 
Numériquesʺ, NMB‐003 édictée par le ministre des Communi‐
cations.
If you have purchased this product under a United States 
Government contract, it shall be subject to restrictions as set 
forth in subparagraph (c)(1)(ii) of Defense Federal Acquisitions 
Regulations (DFARs) Section 252.227‐7013 for Department of 
Defense contracts, and as set forth in Federal Acquisitions 
Regulations (FARs) Section 52.227‐19 for civilian agency 
contracts or any successor regulations. If further government 
regulations apply, it is your responsibility to ensure 
compliance with such regulations.

Information pertaining to OEM customers

The AirCard 597E ExpressCard has been granted modular 
approval for mobile applications. Integrators may use the 
AirCard 597E ExpressCard in their final products without  
additional FCC / IC certification if they meet the following 
conditions. Otherwise, additional FCC / IC approvals must be 
obtained.
1.
At least 20 cm separation distance between the antenna 
and the user's body must be maintained at all times.
2.
To comply with FCC / IC regulations limiting both 
maximum RF output power and human exposure to RF 
radiation, the maximum antenna gain must not exceed 
5.55 dBi in the Cellular band and 4.95 dBi in the PCS band.
3.
The AirCard 597E ExpressCard and its antenna must not 
be colocated with any other transmitter or antenna within 
a host device.
4.
A label must be affixed to the outside of the end product 
into which the AirCard 597E ExpressCard is embedded, 
with a statement similar to the following:
This device contains TX FCC ID: 
This equipment contains equipment certified under IC: 
2417C-AC597E
.
5.
A user manual with the end product must clearly indicate 
the operating requirements and conditions that must be 
observed to ensure compliance with current FCC / IC RF 
exposure guidelines.
The end product with an embedded AirCard 597E 
ExpressCard must pass the unintentional emission testing and 
properly authorized per FCC Part 15 requirements.
Regulatory Information
N7NAC597E
.
41

Advertisement

Table of Contents
loading

Table of Contents