Central Pneumatic Professional 92126 Assembly And Operating Instructions Manual page 3

8. Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across running machines.
9. Maintain tools with care. Keep tools maintained and clean for better
and safer performance. Follow instructions for lubricating and changing
accessories. Inspect tool cords periodically and, if damaged, have them
repaired by a qualified technician. The handle must be kept clean, dry, and
free from oil and grease at all times.
10. Disconnect power. Disconnect tool from air supply when not in use.
11. Remove adjusting keys and wrenches. Check that keys and adjusting
wrenches are removed from the tool or machine work surface before
connecting it.
12. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
13. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and
binding of moving parts; any broken parts or mounting fixtures; and any
other condition that may affect proper operation. Any part that is damaged
should be properly repaired or replaced by a qualified technician. Do not
use the tool if the trigger does not operate properly.
14. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
15. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes
are impaired while taking drugs. If there is any doubt, do not operate the
tool.
16. WARNING: The brass components of this product contain lead, a
chemical known to the State of California to cause birth defects (or other
reproductive harm). (California Health & Safety code § 25249.5, et seq.)
17. Maintenance. For your safety, service and maintenance should be
performed regularly by a qualified technician.
18. Compressed air only. Never use compressed gas as a power source.
19. Do not spray near open flames, pilot lights, stoves, heaters, or any other
heat source. Most solvents and coatings are highly flammable, particularly
when sprayed.
SKU 92126 For technical questions, please call 1-800-444-3353. Page 3