Specifications; Instructions For Putting Into Use; Operating Instructions - Chicago Electric 65766 Operating Instructions Manual

spEciFications

Electrical Requirements
Blade Speed
Blade Stroke
Maximum Cutting Capacity
Chuck Capacity
unpacKing
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at the number shown on the
cover of this manual as soon as possible.
instructions For
putting into usE
read the EntirE important
saFEty inFormation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
From accidEntal
opEration:
turn the power switch of the
tool to its "oFF" position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
SKU 65766
110 V~ / 60 Hz / 0.95
A (loaded)
~2650 SPM
3/8"
18 Gauge Steel
Sheet
1/2"
to prEVEnt
sErious injury
For technical questions, please call 1-800-444-3353.
assembly
1. Use the Hex Wrench (40) to loosen
the Hex Screw (27). See picture
below.
2. Wearing work gloves, insert the
shank of the Blade (39) into the front
of the Body Saw with the blade point-
ed downward.
3. Tighten the Hex Screw to secure the
Blade in place.

opErating instructions

read the EntirE important
saFEty inFormation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
From accidEntal
opEration:
turn the power switch of the
tool to its "oFF" position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
Hex screw (27)
to prEVEnt
sErious injury
Page 9