Installing The Speaker/ Microphone Jacks Cover; Installing The Optional Speaker/ Microphone (Or Headset) - Kenwood TK-2317 Instruction Manual

INSTAllING THE SPEAKEr/ MICroPHoNE JACKS
CovEr
Speaker/ microphone
jack cover
INSTAllING THE oPTIoNAl SPEAKEr/ MICroPHoNE
(or HEADSET)
Speaker/ microphone locking
bracket

If you are not using a speaker/
microphone, install the cover over
the speaker/ microphone jacks using
the supplied M3 x 6 mm screw.
Note: To keep the transceiver water
resistant, you must cover the speaker/
microphone jacks with the supplied
cover.
1 Insert the speaker/ microphone
(or headset) plugs into the
speaker/ microphone jacks.
2 Attach the locking bracket using
the supplied M3 x 6 mm screw.
Note: The transceiver is not fully
water resistant while using the
speaker/ microphone.