Husqvarna EZ24T CE Operator's Manual page 36

Hide thumbs Also See for EZ24T CE:
Table of Contents

Advertisement

MAINTENANCE
Check/adjust throttle cable
Check the condition of belts, belt pulleys
Change the engine oil
Replace the engine oil filter
Clean/replace the spark plugs
Replace the fuel filter
Replace air filter
(paper filter)
2)
Check the caster wheels (every 200 hours)
Replace the air cleaner's pre-filter
Check/adjust the mower deck
Check the engine valve clearance
Perform the 300-hour service
1)
First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours.
conditions, cleaning and replacement are required more often.
= Described in this manual
= Not described in this manual
= Refer to the engine manufacturer's manual
WARNING!
Before performing any service or adjustment checklist
Engage the parking brake.
Place the Blade-switch in the disengaged position.
Turn the ignition switch to OFF position and remove the key.
Make sure the blades and all moving parts have completely stopped.
Disconnect the spark plug wire from all spark plugs and place the wire where it cannot
come in contact with the plug.
36
MAINTENANCE
1)
(foam)
2)
3)
3)
Daily
Before
After
3)
Performed by authorized service workshop.
At least
Maintenance
once
interval
each
in hours
year
25
50
2)
100
300
In dusty

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

966659702

Table of Contents