Table of Contents
Advertisement
Chapter 8
Web settings
WirelessIP 5000 web settings
Overview
The WirelessIP 5000 is able to be configured via the Internet. The WirelessIP 5000 Web settings can configure detailed settings
that cannot be configured from the device itself.
When setting via TELNET:
Firstly, prepare a PC to be used to configure the WirelessIP 5000.
Next, configure the network to connect the PC to the WirelessIP 5000.
Start the browser from the PC to start the WirelessIP 5000 Web settings,
or host name for the device into <host> and enter the port number into <port>. (the port number is 8080 and cannot be omitted).
Access restrictions
The authentication screen for logging in to the WirelessIP 5000 web settings is displayed.
Input the username and password that are set in the WirelessIP 5000 phone and log in.
General User
Username
User (default)
Password
0000 (default)
Authority
(Note) The same user cannot simultaneously log in from multiple browsers (clients).
General user and admin user are allowed to log in simultaneously.
The Web server for this device needs to be configured to "Enabled" when using the Web settings.
The recommended browser is IE 5.0 or later.
・ Browse Basic Information
・ Edit Phonebook
・ Change User Password
http://<host>:and access <port>/
- 8-2 -
Enter the IP address
Advertisement
Table of Contents
