Fujitsu MBB2147RC Product Manual page 5

This manual describes MBB2147RC and MBB2073RC, 2.5-inch type hard disk drives
with an embedded Serial Attached SCSI (SAS).
This manual details the specifications and functions of the above disk drive, and gives the
requirements and procedures for installing it into a host computer system.
This manual is written for users who have a basic understanding of hard disk drives and
their use in computer systems. The MANUAL ORGANIZATION section describes
organization and scope of this manual. The need arises, use the other manuals.
The organization of this manual, related reference manual and conventions for alert
messages follow.
Overview of Manual
This manual consists of the following seven chapters:
Chapter 1 General Description
This chapter introduces the disk drives standard features, hardware, and system
configuration.
Chapter 2 Specifications
This chapter gives detailed specifications of the disk drives and the installation
environment.
Chapter 3 Data Format
This chapter describes the data structure, the addressing method, and the defect
management.
Chapter 4 Installation Requirements
This chapter describes the basic physical and electrical requirements for installing the disk
drives.
Chapter 5 Installation
This chapter explains how to install the disk drives. It includes the notice and procedures
for setting device number and operation modes, mounting the disk drive, and confirming
drive operation.
Chapter 6 Diagnostics and Maintenance
This chapter describes the automatic diagnosis, and maintenance of the disk drive. This
chapter also describes diagnostic methods for operation check and the basics of
troubleshooting the disk drives.
Chapter 7 Error Analysis
This chapter describes in details how collect the information for error analysis and how
analyze collected error information.
C141-E257
Preface
1