Live Video; Live Video > Camera - D-Link DCS-2121 User Manual

LIVE VIDEO

This section allows you to set up your IP camera's live video by using the buttons below.
LIVE VIDEO > Camera
Video Profile:
Full Screen:
Snapshot:
Record Video:
Set Path:
Start/Stop Audio:
Start/Stop Talking:
Start/Stop GP Output:
You can change between your different viewing
profiles, which you can set up in SETUP > Audio and
Video.
This allows you to view the video in full screen mode.
To exit full screen mode, press the ESC key on your
keyboard.
Click it to capture a snapshot image. The image will
pop up in a new window. Then you may save this
image to a local hard drive.
Click this button will start or stop recording video to
the file path specified with the Set Path button (to the
right).
You can change the folder your manual recordings
will be saved to.
This button toggles the built-in microphone on and off,
allowing you to hear audio from the area surrounding
your camera. Audio is on by default.
This will toggle sending audio to a speaker (not
included) connected to the camera's Audio Out port.
This can be used to talk with others near the camera.
This will toggle the GP DO output on and off.
28