Inbound Filters - D-Link DIR-615 User Manual

Section 3 - Configuration
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound
data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote
Administration features.
Name:
Enter a name for the inbound filter rule.
Action: Select Allow or Deny.
Enable:
Check to enable rule.
Source IP Start: Enter the starting IP address. Enter 0.0.0.0 if you do not want
to specify an IP range.
Source IP End: Enter the ending IP address. Enter 255.255.255.255 if you do
not want to specify and IP range.
Click the Save button to apply your settings. You must click
Save:
Save Settings at the top to save the settings.
Inbound Filter
This section will list any rules that are created. You may click
Rules List:
the Edit icon to change the settings or enable/disable the
rule, or click the Delete icon to remove the rule.
D-Link DIR-615 User Manual

Inbound Filters

45