Husqvarna GTH2654 Owner's Manual page 8

ASSEMBLE GAUGE WHEELS TO
MOWER DECK
(See Fig. 4A and 4B)
The gauge wheels are designed to keep the mower deck
in proper position when operating mower.
• Slide gauge wheel bar down into bracket channel, Be
sure that gauge wheel bar aligning holes are on top.
As sem ble gauge wheels as shown using shoulder bolts,
3/8 washers and 3/8-16 center locknuts and tighten
securely.
• For ease of mower to tractor as sem bly, set all the gauge
wheels in the fourth hole from top. Retain with clevis
pins and spring retainers.
PIN
SHOULDER
BOLT
AD JUST ING
BAR
GAUGE
WHEEL
3/8 WASHER
ASSEMBLY
RETAINER SPRING
3/8-16 CENTER
LOCKNUT
FIG. 4A
SET ALL WHEELS
TO 4TH HOLE
FROM TOP
FIG. 4B
TO ATTACH NOSE ROLLER
(See Fig. 5)
• Assemble brackets "A" and "B" to the inside of mower
mounting brack ets as shown. Tighten securely.
NOTE: Be sure bracket tabs are po si tioned in tab holes
in mower brackets.
• Position nose roller between brackets and install rod
and retainer spring.
TAB
HOLE
"A"
BRACKET
RETAINER SPRING
8
HEX
BOLT
LOCK
ROD
NUT
"B"
BRACKET
NOSE
ROLLER
FIG. 5