Advertisement
1. Press MENU and VOL+/- button until the following menu appears on the
screen.
Note: This menu is only appears in TV mode .
2. Press CH+/- button to enter the turning menu and to go up and down to
select the desired option .
3.Press VOL+/- button to adjust the selected option to your preference .
Functions:
Channel Type: Press VOL+/- to select Air or cable.
Color System: Press VOL+/- to select Auto/NTSC/PAL N/PAL M.
Auto Search: Auto search and save the channel .Press the VOL+ button
to start automatic search function operation. All channels now available
will be automatically preset in order .After the search has finished,
the first program number will display on the screen. This search automatically
adds only the active channels in your area to the TV's memory. It deletes any
channels on which there is no broadcast or a poor signal.
Note: The Auto Search function will scan the channels on the selected
Air input. If the TV is connected to cable, please select Cable under
' Air ' sub menu.
Fine Tune : If the image and / or sound received is not very good , you can
press CH+/- to select Fine Tune in the menu . Then , press VOL+/-
button to adjust and improve the image quality. Do not use this feature unless
reception is poor.
Skip : If you want skip a channel , press VOL+/- to select On , and this
channel will be skipped next time when you press CH+/- . You can press
the digit buttons to select the channel . If you want to restore the channel , select
Off.
Advertisement
