Hitachi 55VG825 Operating Manual page 79

Setup
8. Use the CURSOR PAD
brand name of your DVD.
9. Press the CURSOR PAD
CODE Set, then use the CURSOR PAD
to choose the preset IR Code.
10. Use the CURSOR PAD
POWER " Test button.
These On-screen buttons are called " Soft
Keys ".
11. Press the SELECT button to pass the Power
command through the IR Mouse and onto the
DVD.
( Repeat steps 9 to 11 until finding the IR code
that will power up the A/V Receiver. If the DVD
turns ON, then you have found the correct
preset IR code ).
12. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD Settings
Brand Name Hitachi (31/77)
IR Code Set 1 (1/5)
Transmission Test
Test Button
POWER
Move Change Brand Name
13. Use the CURSOR PAD
Input that connects to the video and audio
output of the DVD.
14. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD Settings
Brand Name Hitachi (31/77)
IR Code Set 1 (1/5)
Inputs settings
Video Input Not Connected
Audio Input Not Connected
Move Change Source
15. Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD Settings
Brand Name Hitachi
IR Code Set 1 (1/5)
Video Input Not Connected
Audio Input Not Connected
All settings are complete!
Move Select
SEL
or to choose the
16. Press the SELECT button to select YES to
to highlight the IR
or
to highlight the "
, , and to
Learning Mode
This function of the AV NET allows the user to use
equipment that is not supported by the AV/NET codes.
After programming your equipment to the AV NET and
the Soft Keys do not work, you can manually "LEARN"
each one by completing the Learning Mode. The
Learning Mode will transfer any remote control button
IR code of your equipment to the "Soft Keys" of your
CH
AV NET.
Back Next
Learning Mode (Example: A/V Receiver
or to select the TV
1.
, , and to
Back Next
SEL Select
2.
3.
4.
(31/77)
Back Next
Setup another device. Press the CURSOR
PAD or to highlight " No thanks, I'm done
", then press the SELECT button to exit the
A/V NET SETUP.
AV Net Setup Wizard : Device Settings
Congratulations!
Your DVD is now
connected to your AV network.
Would you like to setup another device?
No thanks, I'mdone.
Move SEL Select
Setup)
Press the SELECT button to start the SETUP
WIZARD.
AV Net Setup Wizard
Welcome to the AV Net Setup Wizard.
Before starting this wizard, please make sure
that all devices are connected appropiately
and the IR blasters are placed in front of the
devices IR sensor.
Move Return
SEL
Use the CURSOR PAD or
YES.
Press the SELECT button to select.
Use the CURSOR PAD , ,
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Do you want to use an A/V Receiver.
Yes
No
Move SEL Select
Yes
Back Start
to highlight
and to
Back Next
79