Hitachi 42HDX61 Operating Manual page 86

HORIZONTAL POSITION, VERTICAL POSITION, HORIZONTAL CLOCK and CLOCK PHASE
AUTO ADJUST
for current RGB format are adjusted automatically.
Setup
Auto Adjust Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Reset
Input Level 0.7V
Off
Black Side Panel
Move Select
SEL
NOTES: • Press SELECT to AUTO ADJUST the RGB mode.
• The other functions do not operate while AUTO ADJUST is in progress.
• Allow the Plasma TV to warm up for 20 minutes before performing AUTO ADJUST.
• Select a bright image for display while AUTO ADJUST takes place.
• If AUTO ADJUST terminates unsuccessfully, try AUTO ADJUST again. If AUTO ADJUST fails several times in
succession, try using manual adjustment to adjust Vertical Frequency, Aspect Ratio, Timing Frequency and Picture.
• Always reset AUTO ADJUST when setting new display setting or when changing to a new
external component.
This feature allows you to adjust the horizontal position of the display.
H POSITION
Setup
Auto Adjust Adjust
Horizontal Position 0
Vertical Position
0
Horizontal Clock 0
Clock Phase 0
Reset Reset
Input Level 0.7V
Black Side Panel Off
Move Select
SEL
V POSITION
Setup
Auto Adjust Adjust
Horizontal Position 0
Vertical Position
0
Horizontal Clock 0
Clock Phase 0
Reset Reset
Input Level 0.7V
Black Side Panel Off
Move Select
SEL
0
0
0
0
This feature allows you to adjust the vertical position in RGB mode.
RGB ON SCREEN DISPLAY
Use CURSOR PAD , cursors to highlight adjust.
Press SELECT to select AUTO ADJUST.
Use CURSOR PAD , to adjust the horizontal position.
Press the MENU button to return to previous menu item. Press
EXIT to quit.
Use CURSOR PAD , to adjust the vertical
position.
Press MENU button to return to previous menu item.
Press EXIT to quit.
86