Fuel Selector; Engine Coolant Temperature Gauge; Service Display - Vauxhall KTA-2675/12-VX-en Owner's Manual

Because of the fuel remaining in the
tank, the top-up quantity may be less
than the specified tank capacity.

Fuel selector

Pressing button LPG switches
between petrol and liquid gas
operation. The status LED 1 shows
the current operating mode.
1 off = petrol operation
1 illumi‐ = liquid gas operation
nates
1 flashes = no switching is
possible, one type
of fuel is empty
As soon as the liquid gas tank is
empty, petrol operation is
automatically engaged until the
ignition is switched off.
After the engine is started, the LED
1 is sometimes off. If the LPG button
is pressed twice in this situation, the
LED 1 starts flashing.
Fuel for liquid gas operation 3 205.
Engine coolant
temperature gauge
Displays the coolant temperature.
Instruments and controls
50° = engine operating
temperature not yet
reached
90° = normal operating
(central temperature
area)
130° = temperature too high
Caution
If engine coolant temperature is
too high, stop vehicle, switch off
engine. Danger to engine. Check
coolant level.

Service display

The engine oil life system lets you
know when to change the engine oil
and filter. Based on driving
conditions, the interval at which an
engine oil and filter change will be
indicated can vary considerably.
101