Table of Contents
Advertisement
will not engage correctly, do not fit
objects to the system and slide the
system back. Seek the assistance
of a workshop.
Install the tail lamps
First remove the rear tail lamp (1),
then the front (2) tail lamp from the
recesses.
Open out the lamp support on the
back of the tail lamp completely.
Storage
Push the clamping lever down and
push the lamp support into the
retainer until it engages.
Perform this procedure for both tail
lamps.
Check the cable and lamp position to
make sure these are correctly
installed and are securely located.
65
Advertisement
Chapters
Table of Contents
