Vauxhall KTA-2722/5-VX-en Owner's Manual page 232

2. Remove the screws, marked by
the arrows.
3. Carefully withdraw the light
assembly from retaining pins and
remove.
4. Detach the plug connector from
the light assembly.
5. Remove and replace the bulb by
turning the bulb socket.
Turn signal light (1)
Tail lights (2)
Brake light (3)
Vehicle care
Tail lights with Light Emitting
Diode (LED) for tail and brake light
Only turn signal light (1) can be
changed.
Remove and replace the bulb by
turning the bulb socket.
6. Connect the plug connector with
the light assembly.
7. Fit light assembly onto retaining
pins and mount light assembly
with the screws.
8. Plug in screw cover.
231