Tone Settings - Vauxhall KTA-2701/5-VX-en Infotainment Manual

2015 movano
Table of Contents

Advertisement

22
Introduction
To access the phone settings menu:
Press the 0 button and select Phone
settings.
CD35 BT - Phone
To access the Phone menu: Press
the 6 or TEL button.
To access the phone settings menu:
Press the SETUP / TEXT button and
select Phone settings.
Use the display options in these
menus to connect mobile phones,
make telephone calls, create contacts
lists and adjust various settings.
Detailed description of the handsfree
phone system functions 3 69.

Tone settings

R15 BT / CD15 BT - Tone
settings
In the audio settings menu, the tone
characteristics can be set.
Press the SETUP button to access
the settings menu.
Select Audio settings and turn the
OK rotary knob until the desired
setting is selected from:
■ BASS (bass)
■ TREBLE (treble)
■ FADER (front/rear balance)
■ BALANCE (left/right balance)
The display indicates the type of
setting followed by the adjustment
value.
Set the desired value by turning the
OK rotary knob and press the knob to
confirm selections.
To exit the audio settings menu, press
the / button.
Note
If there is no activity, the system will
exit the audio settings menu
automatically.
Setting bass and treble
Select Bass or Treble.
Set the desired value by turning the
OK rotary knob and press the knob to
confirm setting.
Setting the volume distribution
between right - left
Select Balance.
Set the desired value by turning the
OK rotary knob and press the knob to
confirm setting.
Setting the volume distribution
between front - rear
Select Fader.
Set the desired value by turning the
OK rotary knob and press the knob to
confirm setting.
CD30 BT - Tone settings
In the audio settings menu, the tone
characteristics can be set.
To move around the menu and select
the various headings, turn the rotary
knob to move up/down and press
button ⊲ or ⊳ to move left/right.
Alternatively, press the rotary knob to
move right only.
Press the 0 button to access the
settings menu.
Select Audio settings and use ⊲ or ⊳
and/or the rotary knob until the
desired setting is selected.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents