Basic Operation; Power On/Off - Hitachi 26LD9000TA User Manual

BASIC OPERATION

POWER On/Off

Now, turn On the main power of the unit. Make sure that the Power Cord
has plugged into the wall socket.
To turn On the power of the television:
1. Press the Main Power switch on the television.
The Indicating Lamp will illuminates in Red (Standby mode).
2. Press Sub Power button either on the control panel or on the remote
control.
The color of the Indicating Lamp turns into Green, and the image
will display on the screen.
To turn Off the power of the television:
1. Press Sub Power button either on the control panel or on the remote
control.
The image disappears from the screen and the Indicating Lamp
turns into Red (Standby mode).
2. Press Main Power switch to completely turn Off the power of the unit.
Indicating Lamp
Status
Off
Red
Green
Orange
* About Power Save mode, see Power Save Mode and When Following Messages Appear on the Screen on
36
and for details.
NOTE
If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on
It may help you to solve the problems.
You can turn ON the power only by pressing the Sub Power button during the Standby mode.
Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.
To avoid sudden surges of electricity when the power comes back on, turn Off the main power of the unit before you
leave if there is a blackout during use of the unit.
Main Power switch (on the left side)
The Indicating Lamp Status Check
Power Status
Off
Standby mode
On
Power Save mode*
Indicating Lamp
Sub Power button
Sub Power button
Power Switch Status
Main power Off
Main power On
Sub Power button Off
Main power On
Sub Power button On
Main power On
Sub Power button On
35
36 38
~ .
19