LCD Conditioning
Reset all OSD settings to the factory preset values.
Push
Factory Reset
Exit Menu
PIP
This function brings up a window displaying image from another input source.
SETTINGS
PIP/PBP submenu when PIP/PBP OFF (main source is
VGA/DVI-D input)
PIP/PBP submenu when PIP/PBP ON (main source is
VGA/DVI-D input)
NOTE:
Push
Back
There is two modes: PIP (Picture in Picture) and PBP (Picture By Picture)
Mode
Use
When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.
When PIP/PBP
activated
Select an input signal for PIP/PBP. (VGA/DVI-D 1/DVI-D 2/DP (DisplayPort)/HDMI/S-Video/Composite/Component)
PIP/PBP Source
Use
Select PIP window size.
PIP Size
Use
to exit the OSD main menu.
When using DVI source, the contrast adjustment is not available.
to go back to the main menu.
and
to browse and
to select "Off", "PIP" or "PBP".
and
to browse and
to select.
and
to browse and
to select.
PIP/PBP submenu when PIP/PBP OFF (main source is Video
input)
or
PIP/PBP submenu when PIP/PBP ON (main source is Video input)
or