Table of Contents
Advertisement
How to set up manually
1
Go to the
Network Settings
screen. Select Start, press E.
2
The
Network
function searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, press the ▲ or ▲ button to select a network, and then press the E button
twice.
― If the wireless router is set to Hidden (Invisible), you have to select
Network Name
Security Key
correct
and
4
If the
Enter security key.
screen appears, go to step 5. If you select a wireless router that does not
have security, go to step 7.
5
If the router has security, enter the
Security Key (Security Key
6
When done, use the right arrow button to move the cursor to Next, and then press E. The
network connection screen appears and the verification process starts.
7
Select
Stop
while network connections are being attempted. This will stop the connection.
8
IP Settings
Select
on network connection screen. The
9
Select the field at the top, press E, and then set
IP
Address.
process for each field in the
― Setting
IP Settings
Enter manually
to
Add Network
and enter the
to establish the connection.
or PIN).
IP Settings
screen appears.
IP Settings
to
Enter
manually. Repeat the entry
DNS setting
Enter
automatically changes
to
10
When done, select
appears and the verification process starts.
11
When the connection has been verified, the
are setup and ready to
WPS(PBC)
How to set up using WPS(PBC)
If your router has a
WPS(PBC)
1
Network Settings
Go to
2
Select WPS(PBC), press E, and then press E again.
3
Press the
WPS(PBC)
all the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
manually.
OK
at the bottom of the page, and then press E. The network test screen
"Your wireless network and Internet connection
use." message appears.
button, follow these steps.
screen.
button on your router within 2 minutes. Your product automatically acquires
121
Advertisement
Table of Contents
Troubleshooting
