Cisco ASA 5505 Hardware Installation Manual page 24

Rack or Wall Mounting the Cisco ASA 5505
Step 6 Remove the three screws from the bottom of the adaptive security appliance as shown in
Discard these screws as you will not need them.
Step 7 Place the wall-mount bracket on the adaptive security appliance. Use the three screws provided in the
accessory kit to screw the wall-mount bracket to the adaptive security appliance as shown in
Figure 3-4
Step 8 Pick up the adaptive security appliance with the wall-mount bracket facing the wall, align the screws in the
anchors with the holes in the brackets.
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
3-6
Removing and Replacing the Screws
Chapter 3 Installing the Cisco ASA 5505
Figure
Figure
OL-18362-01
3-13.
3-13.