Ip Camera Overview - Cisco Video Surveillance 2621 IP Dome User Manual

IP Camera Overview

•
•
•
•
•
•
•
•
•
•
IP Camera Overview
The following sections provide information about the Cisco Video Surveillance IP Camera:
•
•
Cisco Video Surveillance System 2621 IP Dome User Guide
1-2
Motion detection—The IP cameras can detect motion in up to four designated fields of view by
analyzing changes in pixels and generate an alert if motion is detected.
Flexible scheduling—You can configure the IP cameras to respond to events that occur within a
designated schedule.
Syslog support—The IP cameras can send log data to a Syslog server.
IP address filter—You can designate IP addresses that can access an IP camera and IP addresses
that cannot access an IP camera.
User-definable HTTP/ HTTPS port number—Allows you to define the port that is used to
connect to a camera through the Internet.
DHCP support—An IP camera can automatically obtain its IP addresses in a network in which
DHCP is enabled.
Network Time Protocol (NTP) support—Allows an IP camera to calibrate its internal clock with
a local or Internet time server.
Power options—An IP camera can be powered with 12 volts DC or 24 volts AC, provided through
an optional external power adapter, or through PoE (802.3af), is provided through a supported
switch.
Camera access control—You can control access to IP camera configuration windows and live video
by configuring various user types and log in credentials.
Cisco Media API—The IP cameras supports the open, standards based, Cisco Media Application
Programming Interface.
Physical Details, page 1-3
Package Contents, page 1-6
Chapter 1 Overview
OL-24129-02