Cisco DPC3827 User Manual page 90

Configure Wireless Settings
Section
Advanced Wireless
90
Field Description
N Transmission Rate
The rate of data transmission should be set depending on the
speed of your Wireless-N networking. Select from a range of
transmission speeds, or select Auto to have the device
automatically use the fastest possible data rate and enable the
Auto-Fallback feature. Auto-Fallback negotiates the best possible
connection speed between the device and a wireless client. The
default setting is Auto.
Choose one of the following options for transmission rate:

Auto (factory default)

Use Legacy Rate

0: 6.5 or 13.5 Mbps

1: 13 or 27 Mbps

2: 19.5 or 40.5 Mbps

3: 26 or 54 Mbps

4: 39 or 81 Mbps

5: 52 or 108 Mbps

6: 58.5 or 121.5 Mbps

7: 65 or 135 Mbps

8: 13 or 27 Mbps

9: 26 or 54 Mbps

10: 39 or 81 Mbps

11: 52 or 108 Mbps

12: 78 or 162 Mbps

13: 104 or 216 Mbps

14:117 or 243 Mbps

15: 130 or 270 Mbps
CTS Protection Mode
CTS (Clear-To-Send) Protection Mode boosts the device's ability to
catch all wireless transmissions, but can severely decrease
performance. Select Auto if you want the device to use this feature
as needed, when the Wireless-N/G products are not able to
transmit to the device in an environment with heavy 802.11b
traffic. Select Disable if you want to permanently disable this
feature.
4025083 Rev A