Installation & Connection; Base Assembly Installation; Antenna Connection - Haier LE32K700 Owner's Manual

Installation & Connection

Base Assembly Installation

Fasten the base supporting cover to the back cover of machine (It needn't to operate this step when
base support cover had been installed.), and then Insert base assembly to supporting shield hole of
complete machine back cover as illustrated direction of arrow, to make supporting shield and
supporting hole center in the same line, finally fasten the screw.
Screws
Remarks: The base and machine appearance may not same as the picture, specific in accordance
with work order

Antenna Connection

It is better to use outdoor antenna or CATV cable if you want to watch the colorful and hi-definition
pictures. Attention: Please turn off TV power before the outdoor antenna is connected to the
TV signal input port. Outdoor antenna can't be located near the high
voltage cables. Please pull out the plug of outdoor antenna to avoid
thunder shock in thunder weather.
Y Yellow (VIDEO)
W White(AUDIO-L )
R Red (AUDIO-R)
To power socket
Power cable
(AC 100-240V, 60/50Hz)
Audio/Video machine
with HDMI interfaces.
Screws
Base supporting cover
CVBS, DVD Player or other
machine with CVBS/S-Video.
Y
5
Screw
R F
W R