Haier LE22K800 Owner's Manual page 10

Earphone Socket: The TV speakers will be shut off when earphone is inserted into this socket.( Please adjust the volume
to a suitable size, to avoid sounds excessive to affect the hearing.)
S-VIDEO Input Connection: Through S-VIDEO/AUDIO cables to connect external AUDIO/VIDEO equipment to the
machine's AUDIO/VIDEO input port, and press "SOURCE" key to select "S-VIDEO" si gna l source
AV-OUT Connection: If you need watch image of DV and connect your TV game machine, you can connect audio or
video output end of DV and game machine to the monitor.
YPbPr/YCbCr Input Connection
If the signal source is DVD, Digital wired receiver or equipments with the YPbPr/YCbCr output, recommends you to
connect YPbPr or YCbCr output with the TV YPbPr/YCbCr input. In order to obtains the better picture quality, at the same
time, please connect its audio output with TV audio input as shown in the following chart. If you choose the YPbPr/YCbCr
signal, please set signal source selection under YPbPr pattern.
Wall Mounting Stand
Base installation
Base equipment act as the picture. Equip the base
with the machine according to arrow point, and lock
the bolt tightly.
Wall Mounting Board
Wall Mounting subassembly installation
Installation for VESA Wall Mounting
1. Take off the base subassembly
2. Fasten the wall mounting board. ( The height can be confirmed by the user)
3. Fasten the wall mounting stand at the position of VESA on the rear cover with bolts.
4. Spin M4 bolts into the left-right nuts on the wall mounting stand. 3-4 mm of depth from bolts washer to stand is
recommended.
8