What To Do If; Installation - Zanussi ZCV662 User Manual

Important! Use the same oven lamp type.

What to do if...

Warning! Refer to "Safety information"
chapter.
Problem
The hob does not operate
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven lamp does not operate
Steam and condensation settle on
the food and in the oven cavity
The display shows "12.00"
The residual heat indicator does
not come on
If you cannot find a solution to the problem
yourself, contact your dealer or the service cen-
tre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to "Safety information"
chapter.
Technical Data
Dimensions
Height
Width
www.zanussi.com
4. Install the glass cover.
Possible cause
The heat setting is not set
The oven is not switched on
The clock is not set
The necessary settings are not set
The fuse in the fuse box is re-
leased
The oven lamp is defective
You left the dish in the oven for
too long
A power cut
The cooking zone is not hot be-
cause it operated only for a short
time.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
900 mm
Location of the appliance
596 mm
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
Set the heat setting
Switch on the oven
Set the clock
Control the settings
Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
Replace the oven lamp
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
Reset the clock
If the cooking zone must be hot,
speak to the Service Centre.
.........................................
.........................................
.........................................
Dimensions
Depth
Top oven capacity
Main oven capacity
Remedy
600 mm
37 l
74 l
17