Monitor Stand - Dell Inspiron Port Replicator User's Manual

Dell inspiron advanced port replicator

Hide thumbs Also See for Inspiron:

support.dell.com

To connect (or dock) your computer to the APR, perform the following steps:

Verify that the operating system has completed the setup process. For instruc-

tions, refer to the Setup Guide that accompanied your computer.

Save and close all open files, exit all open application programs, and shut down

the computer.

If you have not already done so, connect the AC adapter to the connector on

the APR (see Figure 1-1), and plug the AC power cable into an electrical outlet.

Horizontally center the computer on the APR platform, with the back of the

computer facing the APR's docking connector, as shown in Figure 1-4.

Slide the computer toward the connector until you feel the grooves on the

bottom of the computer engage with the alignment rails.

NOTE: If you have a monitor stand installed, you will not be able to see the

alignment rails or the docking connector.

Gently push the computer forward until the docking connector is fully engaged.

docking connector

Dell Inspiron Advanced Port Replicator User's Guide

alignment rails (2)

1-5

Table of Contents