S.m.a.r.t. Test - D-Link ShareCenter Shadow DNS-325 User Manual

Section 4 - Configuration
S.M.A.R.T. stands for "Self-Monitoring, Analysis, and Reporting Technology". This is a system on a hard drive used to monitor and report on the health of the drive. If the
HD is grayed out, then it does not support S.M.A.R.T.
S.M.A.R.T. To run the S.M.A.R.T. test, select the hard drive you wish to
Test perform the S.M.A.R.T. test on. Then select whether to run a
Quick or Extended S.M.A.R.T. test. Then press "Start" to run
the test. Press the Create Schedule button to run the test at a
pre-determined time and date.
Quick Test Runs a quick S.M.A.R.T. test. The test usually takes less than
10 minutes. This test will check the electrical, mechanical,
and read performance
of the hard drive. The results are displayed as Passed/Failed
on the web UI and can also be sent as an e-mail alert.
Extended Test Runs an extended S.M.A.R.T. test. This test requires a lot
more time to complete. However, it is a more thorough and
complete test when compared to the Quick Test.
Send result Enable this function in order to have the results of the
by E-mail: S.M.A.R.T. test sent to you by e-mail.
Create Click on this button in order to create a scheduled
Schedule S.M.A.R.T. test. You will be able to schedule a test on a
daily, weekly, and monthly basis.
D-Link ShareCenter Shadow DNS-325 User Manual

S.M.A.R.T. Test

35