American DJ Tempest 575H User Instructions page 2

Tempest 575H™
Introduction:
This unit is a one channel, intelligent DMX centerpiece
effect. The Tempest 575H™ has a low profile design for clubs with low
ceilings, producing 6 dichroic colors plus white. Using 18 motors it cre-
ates solid and moonflower type beams that rotate and sweep across
a room. The Tempest 575H
that will randomly be activated by the low frequencies of an audio
source. This unit can run as a stand-alone sound activated unit, or in a
Master/Slave configuration. The optional MINI/C controller will operate
the blackout function. For best results use fog or special effects smoke
to enhance the beams projections.
General Instructions:
To optimize the performance of this product,
please read these operating instructions carefully to familiarize yourself
with the basic operations of this unit. These instructions contain impor-
tant safety information regarding the use and maintenance of this unit.
Please keep this manual with the unit, for future reference.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact American DJ Customer Support.
®
Tempest 575H™
• Quality Stepping Motors for Smooth Transitions
• DMX-512 Protocol Compatible (Uses One DMX Channel)
• 6 Dichroic Colors Plus White
• Master/Slave Operation
• Internal Microphone with Volume Sensitivity Knob
• Several Built-In Programs
• Built-In Safety Breaker
• Optional MINI/C Remote Controller
American DJ - www.americandj.com - Tempest 575H™ Instruction Manual Page 3
© ®
Introduction
™
comes with several built-in programs
Tempest 575H™
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt-
age for your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken.
• Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it's cover is removed.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6" (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• During long periods of non-use, disconnect the unit's main power.
Features
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords and plugs, convenience recep-
tacles, and the point where they exit from the appliance.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 11 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen on, or liquid has been spilled into the appli
ance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
American DJ
©
- www.americandj.com - Tempest 575H™ Instruction Manual Page 4
®
Safety Precautions