LG LMVM2075SB Service Manual page 21

H. ASSEMBLING DOOR
(1) When mounting the door assembly to the oven
assembly, be sure to adjust the door assembly parallel
to the chassis. Also adjust so the door has no
play between the inner door surface and oven frame
assembly. If the door assembly is not mounted
properly, microwaves may leak from the clearance
between the door and the oven.
I. REMOVING THE VENTILATION MOTOR
(1) Remove the mounting plate by loosening
mounting plate screws (1 or 2 screws)
securing it to the back plate.
(See Figure 17)
(2) Remove MOUNT ALL loosening two screw
loosening two screw securing the ventilation Motor
and back plate. (See Figure 18-a)
(3) Carefully pull the ventilation motor ASS'Y out of
the microwave oven. (See Figure 18-b)
7-10