Set Eye-Fi Sd Card Connection Mode - Kodak PIXPRO FZ51 User Manual

The video output signal can be switched to NTSC or
PAL to accommodate different regional TV standards.
The appropriate setting will vary between regions.
NTSC: USA, Canada, Taiwan, Japan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
Note: The TV output will not display properly if an
incorrect video system is selected.

Set Eye-Fi SD Card Connection Mode

This camera supports wireless connection of an Eye-
Fi SD Card. Upload the photos from the camera to the
Internet using the following steps:
. Press the button, press the up/down arrow but-
ton to select and press the
the menu.
2. Press up/down arrow button to select
press the button or right arrow button to enter
the menu.
. Press the up/down arrow button to select「Eye-Fi」
and press the button or right arrow button to
enter the menu.
4. Press the up/down arrow buttons to select「On」
or「Off」and press the
If the Eye-Fi card is not available in the camera,
this feature is not displayed.
button to enter
and
button to confirm.
7